Ubiquiti airFiber 60 XR Price in Pakistan | AF60-XR Wireless Bridge

Ubiquiti airFiber 60 Xtreme-Range Price in Pakistan

Why Choose the Ubiquiti airFiber 60 Xtreme-Range?

The Ubiquiti airFiber 60 Xtreme-Range (AF60-XR) is a professional 60GHz point-to-point wireless bridge designed for high-capacity, long-distance network connections. It is built for ISPs, WISPs, telecom operators, enterprises, campuses, and network professionals that need multi-gigabit wireless backhaul without installing physical fiber between locations.

The AF60-XR delivers up to 5.4Gbps total throughput and supports a maximum specified range of 15+ km. It also includes a 5GHz backup radio that provides more than 800Mbps of backup capacity for weather-resilient connectivity.

Ubiquiti airFiber 60 XR Price in Pakistan

The Ubiquiti AF60-XR is designed for demanding point-to-point wireless networking applications where high bandwidth and long-distance connectivity are required.

Its primary 60GHz radio operates across the 57–71GHz range, depending on regulatory region, while the integrated 5GHz backup radio can maintain connectivity when environmental conditions affect the higher-frequency link. Ubiquiti lists the device as a PtP-only bridge managed through UISP.

Pakistan pricing can vary significantly based on importer, availability, warranty, and regional model. I could not find a sufficiently reliable current Pakistan retailer listing to give you a verified PKR selling price, so I would recommend adding your actual IT.biz.pk selling price rather than publishing an unverified figure.

For reference, current international listings show the AF60-XR around €981–€1,279, depending on the retailer and tax/shipping conditions.

Ubiquiti airFiber 60 XR Features

Key Features

• Ubiquiti airFiber 60 Xtreme-Range
• Model: AF60-XR
• Professional 60GHz Wireless Bridge
• Point-to-Point (PtP) Operation
• Up to 5.4Gbps Total Throughput
• Up to 15+ km Maximum Range
• 2.7Gbps Duplex Throughput
• Integrated 5GHz Backup Radio
• 5GHz Backup Capacity of 800+ Mbps
• 60GHz Wave Technology
• GPS Synchronization
• 1 × Gigabit Ethernet Port
• 1 × 1/10G SFP+ Port
• Passive PoE Support
• 48V DC, 0.65A Gigabit PoE Adapter Included
• WPA2-PSK AES Encryption
• UISP Management
• Bluetooth Management
• Precision Alignment Kit Included
• Integrated Directional Antenna
• IPX6 Weather Protection
• Dual-Radio Connectivity
• Bridge Mode
• Low-Latency Wireless Backhaul
• Outdoor Deployment
• -40°C to 55°C Operating Temperature

Ubiquiti’s current technical specifications confirm the 5.4Gbps maximum throughput, 15+ km range, 1/10G SFP+ port, GPS, IPX6 weatherproofing, and integrated 60GHz and 5GHz radios.

Ubiquiti airFiber 60 XR Specifications

Why Is the Ubiquiti airFiber 60 XR Ideal for Wireless Backhaul?

The airFiber 60 XR is designed for organizations that need to move large amounts of data between two locations without relying on a physical fiber connection.

Its 60GHz radio provides multi-gigabit wireless capacity, while the integrated 5GHz radio provides a backup connection. This dual-radio architecture is particularly useful for outdoor links where heavy rain or other environmental conditions can affect 60GHz connectivity.

The AF60-XR also includes a 1/10G SFP+ interface, giving network administrators greater flexibility when integrating the wireless bridge into high-speed network infrastructure.

Ubiquiti airFiber 60 XR 60GHz Performance

The primary 60GHz radio supports up to 5.4Gbps total throughput with a maximum specified range of 15+ km.

The system supports 2160MHz, 1080MHz, and 540MHz channel bandwidths, depending on firmware and regulatory conditions. Its 60GHz operating channels also vary by region.

This makes the AF60-XR particularly suitable for:

• High-speed ISP backhaul
• Building-to-building connectivity
• Campus networks
• Enterprise backhaul
• Data center links
• Telecom infrastructure
• Wireless Internet Service Providers
• CCTV backhaul
• Remote network sites

Ubiquiti airFiber 60 XR 5GHz Backup Radio

One of the most important features of the AF60-XR is its integrated 5GHz backup radio.

The 5GHz radio can provide more than 800Mbps of backup capacity, helping maintain connectivity when the primary 60GHz connection is affected by environmental conditions.

The backup radio supports multiple channel widths and modulation levels, including up to 256QAM under supported configurations.

This makes the AF60-XR more resilient than a 60GHz-only wireless bridge.

Ubiquiti airFiber 60 XR SFP+ Connectivity

The AF60-XR includes both:

• 1 × Gigabit Ethernet RJ45 port
• 1 × 1/10G SFP+ port

The SFP+ interface is especially useful for high-capacity network infrastructure where the wireless link needs to connect directly to a fiber-based or 10GbE network environment.

Ubiquiti airFiber 60 XR GPS and Alignment

The AF60-XR includes GPS and a precision alignment system designed to simplify installation of the highly directional wireless bridge.

Its 60GHz antenna has a narrow beamwidth of approximately 1.4° in both azimuth and elevation, making accurate alignment particularly important during installation.

For long-distance deployments, professional installation and proper line-of-sight planning are recommended.

Ubiquiti airFiber 60 XR Outdoor Protection

The AF60-XR is built for outdoor network deployments. It features an IPX6 weatherproof enclosure and is rated for operation between -40°C and 55°C.

Ubiquiti specifies wind loading at 422N at 200km/h, helping make the unit suitable for demanding tower and rooftop installations.

Where Can the Ubiquiti airFiber 60 XR Be Used?

The Ubiquiti AF60-XR is ideal for:

• Internet Service Providers
• Wireless ISPs
• Telecom Companies
• Enterprise Networks
• Data Centers
• Corporate Campuses
• Building-to-Building Links
• CCTV Backhaul
• Remote Offices
• Rural Broadband Infrastructure
• Network Aggregation
• High-Speed Wireless Backhaul
• Tower-to-Tower Connectivity

Why Buy the Ubiquiti airFiber 60 XR?

The Ubiquiti airFiber 60 XR offers several advantages:

• Up to 5.4Gbps total throughput
• 2.7Gbps duplex capacity
• 15+ km specified range
• Integrated 60GHz radio
• Integrated 5GHz backup radio
• 800+ Mbps 5GHz backup capacity
• 1/10G SFP+ connectivity
• Gigabit Ethernet
• GPS synchronization
• WPA2-PSK AES encryption
• UISP management
• Precision alignment system
• IPX6 outdoor protection
• Low power consumption
• Professional PtP wireless bridge design

Should You Buy the Ubiquiti airFiber 60 XR?

If you are searching for a high-speed point-to-point wireless bridge in Pakistan, the Ubiquiti airFiber 60 Xtreme-Range AF60-XR is an excellent solution for professional network deployments.

Its combination of 60GHz multi-gigabit connectivity, 5.4Gbps total throughput, 15+ km range, integrated 5GHz backup radio, 10GbE SFP+ connectivity, GPS synchronization, and outdoor protection makes it suitable for ISPs, telecom operators, enterprises, and network infrastructure providers.

For a reliable long-distance link, proper line-of-sight, antenna alignment, spectrum planning, and environmental considerations are essential.

Frequently Asked Questions

1. What is the Ubiquiti airFiber 60 XR used for?

The AF60-XR is a professional 60GHz point-to-point wireless bridge designed for high-speed network backhaul between two locations.

2. What is the maximum throughput of the AF60-XR?

The Ubiquiti airFiber 60 XR supports up to 5.4Gbps total throughput, with 2.7Gbps duplex specified for the main link.

3. What is the maximum range of the airFiber 60 XR?

Ubiquiti specifies a maximum range of 15+ km for the AF60-XR. Actual range and throughput depend on installation conditions, alignment, weather, regulatory requirements, and link design.Read More…

4. Does the AF60-XR have a 5GHz backup radio?

Yes. The AF60-XR includes an integrated 5GHz backup radio designed to provide more than 800Mbps of backup capacity when the primary 60GHz link is affected.

5. Does the Ubiquiti AF60-XR support SFP+?

Yes. It includes one 1/10G SFP+ port in addition to its Gigabit Ethernet port.

Key Takeaway

The Ubiquiti airFiber 60 Xtreme-Range AF60-XR is a professional 60GHz point-to-point wireless bridge offering 5.4Gbps total throughput, 15+ km range, 2.7Gbps duplex performance, an integrated 5GHz backup radio, 1/10G SFP+, GPS synchronization, WPA2 AES security, and IPX6 outdoor protection. It is an excellent choice for ISP, WISP, telecom, enterprise, CCTV, and high-capacity wireless backhaul networks.